Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads.
Submitted by
Amit Nitharwal(12/385)
Atul Gupta(12/)
Nitesh Paliwal(12/)
Subsea completion and control
system
Subsea Completions
Well Completions
 “Completion” is used in offshore oil and gas activities in two
different contexts. A...
A subsea completion is one in which the producing well
does not include a vertical conduit from the wellhead
back to a fix...
 Subsea completions typically contain an upper completion, a
lower completion, and a production tree.
 Production Tree. ...
 Lower Completion.
The lower completion consists of a gravel-pack packer,
sand control screens, and a lower sump packer a...
BENEFITS AND OPPORTUNITIES WITH SUB-SEA
COMPLETIONS
A. Environmental and Economic Benefits
 Subsea completions offer envi...
B. Barriers and Opportunities
 The true success of a subsea completion lies in its
ability to continue to produce over ti...
Regulatory controls
 ”. The new requirements are that when a lessee or operator
plans to install SSSVs and related equipm...
Safety Management
 The safety management of different types of subsea
completions has been reviewed in previous industry
...
General Technology Issues
 General technological aspects of subsea completions are
concerned with the materials and envir...
Environmental Issues.
The barriers and opportunities for subsea completions
relative to environmental aspects fall into tw...
Subsea Control System
 In order to ensure safe and efficient operation of the subsea
production systems, their various co...
Subsea completion and control system
Subsea completion and control system
Upcoming SlideShare
Loading in …5
×

Subsea completion and control system

2,835 views

Published on

  • Be the first to comment

Subsea completion and control system

  1. 1. Submitted by Amit Nitharwal(12/385) Atul Gupta(12/) Nitesh Paliwal(12/) Subsea completion and control system
  2. Subsea Completions Well Completions  “Completion” is used in offshore oil and gas activities in two different contexts. A well completion involves a set of actions taken to convert an individual borehole into an operational system for controlled recovery of underground hydrocarbon resources. Those actions include installation of the final well casings that isolate fluid migrations along the borehole length while also establishing perforated sections where needed to capture the hydrocarbons from the geologic reservoir into the production casing. Subsea Completions  A subsea completion refers to a system of pipes, connections and valves that reside on the ocean bottom and serve to gather hydrocarbons produced from individually completed wells and direct those hydrocarbons to a storage and offloading facility that might be either
  3. A subsea completion is one in which the producing well does not include a vertical conduit from the wellhead back to a fixed access structure  A subsea well typically has a production tree to which a flowline is connected allowing production to another structure, a floating production vessel.  Subsea completions may be used in deep water as well as shallow water and may be of any pressure and temperature rating including high-pressure, high- temperature (HPHT).  Subsea completions consist of a production tree sitting on the ocean floor, an upper completion connecting the production tree to the lower completion and the lower completion which is installed across the producing intervals.
  4.  Subsea completions typically contain an upper completion, a lower completion, and a production tree.  Production Tree. The production trees are typically available in traditional vertical trees and horizontal trees. Those are further characterized by their mode of operation (electric versus hydraulic) and the number and types of penetrations through the tree to control subsurface equipment and hydrocarbon production.  Upper Completion. The upper completion consists of production tubing from the tree to the subsurface safety valve (SSSV) and then production tubing down to the production packer installed in the production casing. The types of SSSVs vary by their method of installation. For normal wells, the typical mode is within the tubing and installed with the completion. Other variations of SSSVs include the method of operation (hydraulic versus electric), and various types depending on methods of construction (opening method, sealing mechanism, etc.). The production packer varies by the desired method of retrieval. Permanent packers must be drilled out to remove them from the
  5.  Lower Completion. The lower completion consists of a gravel-pack packer, sand control screens, and a lower sump packer all connected together by production tubing. The gravel-pack packer is installed above the screens and serves to anchor the lower completion inside the production casing. Various types of packers are available depending on the method of gravel packing the well and the desired release mechanism. The sand control screens and the accompanying gravel pack or frac pack vary with the formation types and desired productive interval placement. Screens may be of various types including wire mesh; wire wrapped, and pre-packed screens. Expandable sand screens may also be installed to maximize the remaining inside diameter of the screen base pipe
  6. BENEFITS AND OPPORTUNITIES WITH SUB-SEA COMPLETIONS A. Environmental and Economic Benefits  Subsea completions offer environmental benefits that accrue during the development of the resource (less time over the hole, fewer resources used, less capital equipment requiring resources to develop the field, etc.) as well as continuing availability during the production and eventual disposal of the production equipment (platforms, manifolds, etc.).  Subsea completions have an economic advantage compared to other field development alternatives such as bottom-founded structures (platforms, etc.). This advantage increases with increasing water depth  the cost of a bottom-founded structure was compared to a Floating Production, Storage, and
  7. B. Barriers and Opportunities  The true success of a subsea completion lies in its ability to continue to produce over time. Any interruption of the production stream (particularly from deepwater, high-producing wells) can quickly affect the economic performance of a project. Fortunately, subsea completions are relatively trouble-free after the initial installation.  Regulatory controls  Safety management  Economic advantages  Technological aspects  Environmental issues.
  8. Regulatory controls  ”. The new requirements are that when a lessee or operator plans to install SSSVs and related equipment in an HPHT environment, the lessee/operator must submit detailed information with their Application for Permit to Drill (APD), Application for Permit to Modify (APM), or Deepwater Operations Plan (DWOP) that demonstrates the SSSVs and related equipment2 are capable of performing in the applicable HPHT environment. The detailed information must include the following:  A discussion of the SSSVs’ and related equipment’s design verification analysis.  A discussion of the SSSVs’ and related equipment’s design validation and functional testing process and procedures used.  An explanation of why the analysis, process, and procedures ensure that the SSSVs and related equipment are fit-for- service in the applicable HPHT environment
  9. Safety Management  The safety management of different types of subsea completions has been reviewed in previous industry publications (Cooper, 2008; King, 2001; Fahlman, 1974). The safety aspects can be distilled into the following categories: (1) risks to personnel, (2) risks to the environment (3) risks to equipment or operations. Economics. The primary economic advantage of a subsea completion can evaporate instantly if a workover is required. The subsea wellheads are designed so that workovers are possible by re- entering the well but mobilization of floating workover rigs and the day-rate costs of those vessels make all but the most serious operations to be cost-prohibitive. Advances in well intervention to reduce cost and improve operational capability are required to further enhance the economic attractiveness of subsea completions
  10. General Technology Issues  General technological aspects of subsea completions are concerned with the materials and environment of the wells.  Typically, the cost of interventions drives operators to select materials which have known survival rates in the estimated down hole environment. high alloy materials are generally selected to insure life-of-the-well performance regardless of their cost multiplier over conventional alloys.  Material availability in large-bore components can sometimes be an issue as well as delivery in volumes as required for subsea field development.  Since the completion of subsea wells began, the push to deeper and deeper water to reach more and more hydrocarbons seems to be an unstoppable march.  Drilling and completing exploratory wells is replete with risks relative to unknown pressures, temperatures, and gradients of pressure that may change quickly due to geologic conditions. Shallow gas is one example of a drilling hazard that must be adequately anticipated and managed during well construction.
  11. Environmental Issues. The barriers and opportunities for subsea completions relative to environmental aspects fall into two categories. 1)The first opportunity is reduction of overall resources needed to develop the hydrocarbon production. Considering the size and mass of steel required to construct an offshore platform, the development of a series of wells using subsea Completions make the latter attractive 2)The second category of environmental effects is that on the potential for reduction of spills, leaks, and other releases of hydrocarbons during well construction and production. The subsea completion by its nature is a well-controlled activity as the equipment must be designed to operate under water (at sometimes significant pressures) which, in itself, requires sealed connections to prevent water ingress and therefore
  12. Subsea Control System  In order to ensure safe and efficient operation of the subsea production systems, their various components such as valves, chokes and connectors must be properly controlled. Also it is often desirable to have feedback from these components and other instrumentation indicating various process parameters such as down hole/wellhead pressures and temperatures and fluid flow rate and diagnostic parameters of the control system itself.  Control systems currently employed utilize hydraulics and often electronics to differing degrees. Of these most commonly used is the electro-hydraulic multiplexed system. The system requires hydraulic power supplied from the host platform to actuate control devices. Coded signals for operating these field devices and data signals from field instruments to the host platform are transmitted through an electrical cable.  Electric power is usually supplied through a separate cable.Research is underway for developing an all-electric control system, which will eliminate the need for hydraulic link between the subsea system and host platform

×